Head Restraints (Removal); Steering Wheel; Adjustments - Alfa Romeo Giulia 2020 Owner's Manual

Head Restraints (Removal)

To remove the head restraints, proceed as
follows:
1. Raise the head restraints to their
maximum height.
2. Push the adjustment button and the
release button at the side of the two
supports.
3. Remove the head restraints by pulling
them upwards.
To reinstall the head restraints, proceed as
follows:
1. Hold down both the adjustment button
and release button while placing the head
restraint post into the holes.
2. Then, reposition the head restraint to the
appropriate height for the passengers.
WARNING!
A loose head restraint thrown forward in a

collision or hard stop could cause serious
injury or death to occupants of the vehicle.
Always securely stow removed head
restraints in a location outside the occu-
pant compartment.
ALL the head restraints MUST be rein-

stalled in the vehicle to properly protect
the occupants. Follow the re-installation
instructions above prior to operating the
vehicle or occupying a seat.

STEERING WHEEL

Adjustments

This feature allows you to tilt the steering
column upward or downward. It also allows
you to lengthen or shorten the steering
column. The tilt/telescoping lever is located
below the steering wheel at the end of the
steering column.
Steering Wheel Adjustment
1 — Tilt/Telescoping Control Handle
A — Open
B — Closed
33