Table of Contents
Advertisement
Power Seat Adjustment
1 — Seat Adjustment
2 — Recline Adjustment
3 — Lumbar Adjustment
CAUTION!
Do not place any article under a power seat
or impede its ability to move as it may cause
damage to the seat controls. Seat travel may
become limited if movement is stopped by
an obstruction in the seat's path.
Forward/Rearward Adjustment
Push the seat switch forward or rearward to
adjust to your desired position.
Seatback Recline
The angle of the seatback can be adjusted
forward or rearward. Push the seatback switch
in the desired direction, and the seat will move
in the direction of the switch. Release the
switch when the desired position is reached.
Power Lumbar
The power lumbar switch is located on the
outboard side of the power seat. Push the
switch forward or rearward to increase or
decrease the lumbar support. Push the switch
upward or downward to raise or lower the
lumbar support.
Height Adjustment
The height of the seats can be adjusted up or
down. Pull upward or push downward on the
seat switch, and the seat will move in the
direction of the switch. Release the switch
when the desired position is reached.
Seat Angle Adjustment (Tilting) — If Equipped
The seat angle can be adjusted in four direc-
tions. Lift or push the front part of seat switch
to move the front part of the seat in the corre-
sponding direction. Release the seat switch
when the seat has reached the desired posi-
tion.
Power Bolster Adjustment — If Equipped
Push the power bolster adjustment buttons to
regulate the width of the backrest through the
lateral padding.
Seatback Width Adjustment
4 — Power Adjustable Bolster Buttons
5 — Driver Memory Seat Buttons
Seat Cushion Extension — If Equipped
Lift the adjustment lever and push the front of
the cushion forward or rearward to extend the
cushion by a few inches (centimeters).
Seat Cushion Extension
6 — Adjustment Lever
27
Advertisement
Table of Contents
