Table of Contents
Advertisement
Exiting A Lane With Detection Of Both Limits
When the system is active, both lane lines on
the display illuminate in white to indicate the
successful detection of both limits.
When lane limits are detected, the system is
ready to provide indications in case the driver
unintentionally leaves the lane (turn signal not
activated).
As the Lane Departure Warning system
detects the lane limits while the vehicle is in
motion, it will adjust the display accordingly
(from white to yellow and vice versa, and
increase their thickness).
If a line is crossed, the driver is alerted by an
audible signal as well as the visual indication
in the instrument cluster. The signal is emitted
through the speakers on the side of the lane
limit which is being crossed (e.g. if the vehicle
is exceeding the left line of the lane, the
audible signal will come from the speakers on
the left of the vehicle).
Changing The System Settings
The system's sensitivity can be set through the
radio system. Sensitivity "High" or "Low" can
be selected.
To access the function, from the main menu
select the following in order:
1. "Settings"
2. "Comfort"
3. "Lane Departure Warning"
4. "Sensitivity"
Limited Operation Warning
If a message appears on the display, a condi-
tion limiting the Lane Departure Warning
system operation may have occurred. This
could be an obstruction of the camera view, or
a fault in the system.
If an obstruction is detected, clean the area of
the windshield by the interior rear view mirror.
Although the vehicle can still be driven in
normal conditions, the system may not func-
tion properly.
When the conditions limiting the system are
corrected, it will go back to normal operation.
Should a fault persist, contact an authorized
dealer.
System Failure Warning
If the system turns off and the warning light
appears on the display, it means that there is
a system fault.
In this case, it is still possible to drive the
vehicle, but you are advised to contact an
authorized dealer as soon as possible.
LANE KEEPING ASSIST (LKA)
SYSTEM —IF EQUIPPED
The Lane Keeping Assist (LKA) system uses a
camera located on the windshield to detect
the lane limits and calculate the position of the
vehicle within such limits, in order to make
sure that the vehicle remains inside the lane.
This is an active system that will apply torque
to the steering wheel if it senses that the
vehicle is drifting out of the lane.
When one or both lane limits are detected and
the vehicle passes over one without a turn
signal being applied, the system will apply
torque to the steering wheel and a visual
signal will be displayed in the instrument
cluster display. An audible signal may also
sound.
If the vehicle continues to go beyond the lane
line without any driver intervention, the
surpassed lane line (left or right) will light up
on the instrument cluster display to urge the
driver to bring the vehicle back inside the lane
limits.
Lane Crossed
189
Advertisement
Table of Contents
