WARNING!
Do not ride with the seatback reclined so that
the shoulder belt is no longer resting against
your chest. In a collision you could slide under
the seat belt, which could result in serious
injury or death.
DRIVER MEMORY SETTINGS
This feature allows you to save up to three differ-
ent memory profiles for easy recalling through a
memory switch. Each memory profile saves your
desired position settings for the following
features:
•
Driver's seat
•
Side Mirrors
To recall the memory settings, push the desired
memory button number (1, 2, or 3).
Memory Seat Buttons
26
INTERIOR
Programming the Memory Feature
1. Place the ignition in the ACC position (do not
start the engine).
2. Adjust all memory profile settings to desired
preferences (i.e., seat and side mirror
positions).
3. Push and hold the memory button you want
to program for 1.5 seconds. A chime will sound
to indicate that the memory profile has been
saved successfully.
HEAD RESTRAINTS
Did you know your vehicle is equipped with front
driver and passenger head restraints that can be
adjusted two different ways?
Head restraints are designed to reduce the risk of
injury by restricting head movement in the event
of a rear impact. Head restraints should be
adjusted so that the top of the head restraint is
located above the top of your ear.
To raise the head restraint, pull up on the head
restraint until it clicks into place.
To lower the head restraint, push in the adjust-
ment button and lower the head restraint to the
desired height while holding the button. Then,
release the adjustment button.
Front Head Restraint
1 — Adjustment Button
2 — Release Button
Rear Head Restraint
1 — Adjustment Button
2 — Release Button