Power over Ethernet (PoE) (IK-WB16A only)
When using a PoE switch
l
The Network Camera is PoE-compliant, allowing transmission of power and data
to both run in a single Ethernet cable. See the following illustration to connect the
Network Camera to a PoE switch via Ethernet cable.
When using a non-PoE switch
l
Use a PoE power injector to connect between the Network Camera and a non-PoE
switch.
PoE power injector
(not supplied)
1
2
3
4
WPS/RESET
microSD
microSD
For this connection method, the
AC adapter is not used.
PoE switch
(not supplied)
For this connection method, the
AC adapter is not used.
1
2
3
4
WPS/RESET
Non-PoE switch
(not supplied)
19