Toshiba PDR PDR-M4 Instruction Manual page 45

Photography (Auto Photography) (continued)
Set the mode dial to [
Look at the image on the LCD monitor to compose the
picture.
To adjust the brightness of the LCD monitor
Press the shutter button down half way q, and press
it down fully w.
• Pressing the shutter button down half way adjusts the exposure,
and pressing the shutter button down fully takes the shot.
• When the focus and exposure are adjusted, the viewfinder lamp
turns green.
• When preview is set to ON (
displayed on screen for about two seconds.
• The viewfinder LED turns red while image data is being recorded
onto the SmartMedia.
Memo
• The LCD monitor sometimes displays bright, dark or colored spots at all times. This is not a malfunction.
These spots do not appear in the photographed image.
• The image is not displayed on the LCD monitor while the shutter button is pressed down fully.
].
Page 91
Page 63), a preview image is
- 43 -
q Press down
half way.
w Press down
fully.