Activating/Deactivating Wlan Module - Viessmann Vitopend 100-W Installation And Service Instructions Manual

Further details regarding the individual steps
02. Press MODE.
03. Use / to select "P10".
04. OK to confirm
05. Use / to select access code 2
for parameter level 2.
06. OK to confirm
■ "PL:2" is shown on the addi-
tional display
■
is shown in the upper dis-
play area

Activating/deactivating WLAN module

Connect control unit to WLAN
If the system user wishes to access the
heating system with a mobile device,
activate the integrated WLAN module.
Activate WLAN module via key com-
bination
Press and hold MODE,
the same time for at least 5 seconds
until "ON" or "OFF" appears on the
display. Release the buttons and the
change will be accepted.
Commissioning, inspection, maintenance
07. MODE to confirm
08. Use
09. OK to confirm
10. Use
11. OK to confirm
12. MODE to exit the parameter level.
Activate WLAN module via menu
Press the following buttons:
1. Press and hold MODE and
and OK at
2. Press MODE within 5 seconds until
(cont.)
/ to select "P14".
/ to select the function.
■ Outside temperature sensor:
"OTC"
■ Room temperature sensor:
"RTC"
same time for at least 5 seconds
until the following display appears:
the following display appears:
at the
39