Service Tools; Service Program Mode; Service Program Mode Access Procedure - Ricoh A163 Service Manual

3.

SERVICE TOOLS

3.1

SERVICE PROGRAM MODE

The service program (SP) mode is used to check electrical data, change mode or
adjustment values.

3.1.1 Service Program Mode Access Procedure

How to access the SP mode for service representatives (All service program
modes can be accessed with this procedure.)
Press the following keys in sequence.
→ →
The second time that the
seconds (until the
How to access the SP mode for customers and sales representatives
modes 1 to 35 are accessible by a customer with this procedure.)
Press key then hold down
and indicators blink).
How to leave the SP mode
Press the following keys in sequence
→ →
or turn off the main switch.
NOTE: Each of the above procedure must be finished within 20 seconds.
How to select the program number
The program number can be selected by the
selected program number is displayed in the lead edge erase indicator (the two
digit indicator beside the
To select the program number quickly, hold down
A163
→ →
key is pressed, hold it down for more than 3
and indicators blink).
mark).
4-8
key more than 3 seconds (until the
and
or
(SP
keys. The
key.
FSM