Operation; Configuring The Detector - Honeywell FS20X Series User Manual

Operation

Configuring the Detector

N OT I C E
To activate changes to the settings using SW1, SW2, or SW3, reset the detector
by cycling the 24 VDC power.
DIP Switch SW1
The digital address for RS-485 communication can be set using positions 4 through
10 on DIP switch SW1, shown in
3 on SW1; they are for factory use only.)
Figure 24. Ten-position DIP switch SW1.
Digital Address 1
000 off
001 off
002 off
003 off
124 off
125 off
126 off
127 (default) off
FS20X Fire and Flame Detectors
Figure 24. (Do not change switch positions 1, 2, or
SW1 Configuration
2 3 4 5
off off off off
off off off off
off off off off
off off off off
off off on on
off off on on
off off on on
off off on on
6 7 8 9
off off off off
off off off off
off off off on
off off off on
on on on off
on on on off
on on on on
on on on on
10
off
on
off
on
off
on
off
on
31