Operation; Establish Connection With The Device - Honeywell FS24X User Manual

Flame detector

Hide thumbs Also See for FS24X:

Table of Contents

FS24X/FS20X DTM Manual, Issue 1

9. After the update you will find the device types listed in your catalog:

Operation

4.1

After completion of § 2, please follow the steps described below for establishing the connec-

tion with your device using a serial HART modem and the CodeWrights HART Communication

DTM (setting up a project in another frame or using another communication DTM might differ):

1. Open the PACTware frame application and make sure you have updated the "Device

catalog" (if not already done yet) as mentioned in § 3.4 Position 7

2. Connect the device and the serial HART modem as described in the FS24X/FS20X

device manuals (see §

3. Connect the modem connector to the PC COM port (serial modem) or USB port (USB

Modem).

4. Right-click on "HOST PC" in the project view on the left-hand side and select "Add

device" to add the HART Communication DTM. On the next screen, select the DTM

and click "ok":

for technical details)

Table of Contents

Fs20x