Honeywell FS20X Series User Manual page 32

FS20X Fire and Flame Detectors
DIP Switch SW2
Figure 25. Eight-position DIP switch SW2
Alarm Relay
Latching
Non-latching
Sensitivity Levels
Very High (4)
High (3)
Medium (2)
Low (1)*
*The low sensitivity range is not compliant
with the requirements of EN 54-10:2002.
Auxiliary Relay
No Verify Time
5 Sec. Verify Time
10 Sec. Verify Time
20 Sec. Verify Time
32
SW2 Configuration
Default settings are highlighted in grey.
SW2-1
on
off
SW2-2 SW2-3
on on
on off
off off on
off off
SW2-4 SW2-5
on on
on
off off
off on
Factory Use Only
off off
SW2
1 2 3 4 5 6 7 8
**If the fault relay is de-energized,
SW2-6
off
ON
OFF
Fault Relay SW2-8
Energized on
De-energized** off
the detector will not report loss
of power faults.
Alarm Relay SW2-7
Energized on
De-energized off