Table of Contents
Advertisement
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
1.
General
A.
System Overview
(1)
The Small SATCOM UAV system is part of the Aircraft Earth Station (AES) that facilitates
airborne satellite communications using Swift Broadband (SBB) services over the Inmarsat
L-Band satellite communications network.
(2)
Set your laptop to obtain an IP address automatically or set a static IP address in the
192.168.1.2-255 or using satcom.honeywell.com
2.
Modes of Operations
A.
System Interfaces
(1)
This section describes the external hardware interfaces provided by the indoor unit. The
presence of hardware interfaces in this section does not mean that these interfaces are
supported by software or that they are functional in every mode of operation.
(2)
Over Ethernet, the following logical control interfaces are available:
– Storage Temperature/JSON interface is the primary command interface.
– WebUI interface is a web page to control and monitor the terminal.
– PPPoE connections are supported.
B.
WebUI
(1)
Is accessed by typing 192.168.1.1 or satcom.honeywell.com into the address bar of any
browser.
NOTE:
Figure 10 displays the WebUI configuration and status information.
(2)
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SMALL SATCOM
SECTION 3 - SYSTEM OPERATION
When accessing the WebUI an expired/not valid SSL certificate warning might be
shown. This is expected behaviour and the warning can be bypassed. Depending
on the web browser used, a button such as "Continue anyway" or "I understand
the risk" might have to be clicked in order to bypass the message and access
the WebUI.
Page 28
18 Feb 2021
Advertisement
Table of Contents
