Installation; Package Contents; Hardware Installation; Supported Platforms - Logitech LogiCad3D Magellan/SPACE MOUSE Classic User Manual

Installation

To install the Magellan/SPACE MOUSE device
and driver software on UNIX systems, see the
information below. For help with installation
problems see Troubleshooting.

Package Contents

The product package contains:
a 3D input device (Magellan/SPACE MOUSE
Classic, Plus or Plus XT);
a CD-ROM containing the driver software;
the product documentation; and
a serial port adapter (if required for the
system specified at the time of order).

Hardware Installation

The Magellan/SPACE MOUSE has a serial
interface cable with a 9-pin female connector,
which must be connected to the proper serial
port (RS232 or V24) of your UNIX workstation.
The Magellan/SPACE MOUSE cable either plugs
directly into the serial port at the back of the
workstation or may require a separate adapter
cable, which has been included if required.
TURN OFF the workstation before connecting
the Magellan/SPACE MOUSE. Once the
connections have been made, you can restore
power to the workstation. For further
information see the related appendices listed
below.
Related Sections
Connecting to the RS232 Serial Port
Connecting to IBM RS6000 Workstations
Connecting to SGI Workstations
Connecting to SUN Workstations

Supported Platforms

The Magellan/SPACE MOUSE X-Window driver
is supported on the following platforms:
DEC Digital Equipment Corporation
with OSF1
HP Hewlett-Packard Company
with HP-UX
International Business
IBM
Machines Corporation with AIX
SGI 53 Silicon Graphics Inc. with IRIX
5.3
Silicon Graphics Inc. with IRIX
SGI 62/32
6.2/32 bit (R4000, R5000, ... )
Silicon Graphics Inc. with IRIX
SGI 62/64
6.2/64 bit (R10000, ... )
SGI 63/32 Silicon Graphics Inc. with IRIX
6.3/32 bit (R10000, ... )
Silicon Graphics Inc. with IRIX
SGI 64/64
6.4/64 bit (R10000, ... )
SGI 65/64 Silicon Graphics Inc. with IRIX
6.5/64 bit (R10000, ... )
Sun Microsystems with Solaris
SUN
Locate your application in the following pages
of this manual. The appropriate global
installation commands and other important
installation instructions are listed for each
supported platform.
NOTE: This list was last updated 10/2000.
(For the most current application list, please
see www.logicad3d.com/software/drivers.) If
the list indicates that an appropriate driver is
included with your application, you should
consult the application manual for the
appropriate Magellan/SPACE MOUSE
installation procedure.
5