Warranty Information - Logitech LogiCad3D Magellan/SPACE MOUSE Classic User Manual

Warranty Information

LogiCad3D's Limited Lifetime Hardware
Warranty
LogiCad3D warrants that Magellan/SPACE
MOUSE is free from significant defects in
materials and workmanship under normal use
for as long as the device is owned. During the
first three years of ownership, LogiCad3D will
at its sole option, replace or repair at no
charge the product, which in its opinion is
defective.
During the remaining years of the warranty,
LogiCad3D will, at its sole option, replace or
repair the defective product. LogiCad3D will
charge a fixed fee to cover handling and
service costs based on LogiCad3D's then
current price schedules. LogiCad3D at its sole
option, may replace or repair the defective
product with a then current product having
similar features and functionality as
determined by LogiCad3D.
Damages or defects to the product caused by
improper installation, modification, misuse or
abuse are not, of course, covered by this
warranty. Additionally, the warranty service
offered above is nontransferable, which means
that the particular warranty service described
above is available only to the original
purchaser of the product(s). If LogiCad3D
determines that the product is not defective or
was not under warranty, it will return the
product(s) to you, freight collect.
To obtain warranty service, you must either
(a) have a completed warranty registration
card on file at LogiCad3D, or (b) submit
acceptable proof of purchase (for instance, a
copy of your sales receipt indicating date and
place of purchase) to LogiCad3D's Customer
Service Department. You will need to pack the
product to be returned properly for shipment
and pay any applicable shipping charges.
LogiCad3D will send you the repaired or
replaced product at its own expense.
LOGICAD3D DISCLAIMS ALL OTHER
WARRANTIES, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE WITH
REGARD TO THE PRODUCT. IN NO EVENT
SHALL LOGICAD3D OR ITS SUPPLIERS BE
HELD LIABLE FOR ANY DIRECT, INDIRECT,
CONSEQUENTIAL OR INCIDENTAL DAMAGES
ARISING OUT OF THE USE OF OR INABILITY
TO USE THE PRODUCT, EVEN IF LOGICAD3D
HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. SOME STATES DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF
LIABILITY FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU.
FCC Compliance Statement
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1) This device may not cause harmful
interference.
2) This device must accept any interference
received, including interference that may
cause undesired operation.
FCC Declaration of Conformance
Trade Name: Silicon Graphics, Inc.
Product: Computer Graphics Workstation
Model Number: CMNBO15B
Date of Conformance: 1/97
Responsible Party: Silicon Graphics, Inc.
Address: 2011 North Shoreline Boulevard
Mountain View, CA 94043-1389
U.S.A.
Tel: 650 933-1071
This equipment complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
1)
This device may not cause harmful
interference.
2) This device must accept any interference
received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
25