Driver Installation Procedures; Starting The Driver For The First Time; Uninstalling The Driver - Logitech LogiCad3D Magellan/SPACE MOUSE Classic User Manual

Driver Installation Procedures

Follow the instructions below for either global
installation (with "root" privileges) or local
installation (without "root" privileges).
Related Sections
Troubleshooting
SGI Workstations With IRIX 6.2 or Higher
Additional Command Line Options
Global Installation
1 Mount the CD-ROM (replace the #
symbol with the number of your CD-ROM
drive).
DEC: mkdir /CDROM
mount –rt cdfs –o noversion /dev/rz#c
/CDROM
cd /CDROM
HP: mkdir /CDROM
mount –F cdfs –o ro,cdcase
/dev/dsk/c0t#d0 /CDROM
cd/ CDROM
IBM:
mkdir /cdrom
mount –v cdrfs –r /dev/cd0 /cdrom
cd /cdrom
SGI: mkdir /CDROM
mount –rt iso9660 /dev/scsi/sc0d#10
/CDROM
cd /CDROM
SUN: mkdir /cdrom
mount –F hsfs –r /dev/dsk/c0c6d#s0
/cdrom
cd /cdrom/cdrom0
2 Install and configure the driver. (Note
that your system may require a different
command line. Refer to the application
list on pages 7-9.)
./xinstall
Select your application and the serial port
to which the Magellan/SPACE MOUSE is
connected. Press Install and Exit .
3 (OPTIONAL) Set the user-defined
configurations. Create a link from
/usr/magellan/home to the home
directory of all users, e.g.:
ln –s /hom /usr/magellan/home
Copy (once) the global configuration file
to the user home directory.
cp /usr/magellan/xdriver.ini
/home/<username>/xdriver.ini
Local Installation
1 Create a subdirectory for the Magellan/
SPACE MOUSE driver.
mkdir ./magellan
chmod 777 ./magellan
cd ./magellan
2 Copy the driver from the CD-ROM
(replace the # symbol with the number of
your CD-ROM drive).
DEC:
mkdir /CDROM
mount –rt cdfs –o noversion /dev/rz#c
/CDROM
cp /CDROM/dec/xdriver xdriver
HP: mkdir /CDROM
mount –F cdfs –o ro,cdcase
/dev/dsk/c0t#d0 /CDROM
cp /CDROM/hp/xdriver xdriver
IBM: mkdir /cdrom
mount –v cdrfs –r /dev/cd0 /cdrom
cp /cdrom/ibm/xdriver xdriver
SGI:
mkdir /CDROM
mount –rt iso9660 /dev/scsi/sc0d#10
/CDROM
cp /CDROM/sgi/xdriver xdriver
SUN: mkdir /cdrom
mount –F hsfs –r /dev/dsk/c0t6d#s0
/cdrom
cp /cdrom/cdrom0/sun/xdriver xdriver
3 Install and configure the driver.
chmod 555 xdriver
./xdriver -new
Select your application and the serial port
to which the Magellan/SPACE MOUSE is
connected. Press Install and Exit .
4 The driver must be active before you
launch your application. This can be
achieved in several ways, e.g. enter the
call of the xdriver in the application
startup file, in a login startup file (.cshrc)
or in the Xstartup file (as root). The call
of the xdriver is:
<path>/xdriver &

Starting the Driver for the First Time

After the system has copied the X-Window
driver, the driver must be started for the first
time and configured. The driver demands
sequential information in procedure, which it
then stores in a fixed configuration table. The
file name of the configuration table is
xdriver.ini . It is saved in the directory
/usr/magellan (the same directory in which the
X-Window driver is installed). While activating
the X-Window driver, it searches for the
configuration table and uses the information
stored there.
Uninstalling the X-Window Driver
To uninstall a global installation, use the
following command:
/usr/magellan/xdriver –disableinit
To uninstall a local installation, simply remove
the xdriver entry from the start-up file.
9