Dremel 3D40 FLEX Operating/Safety Instructions Manual page 30

DM 2610039151 10-18.qxp_3D40 10/8/18 10:34 AM Page 30
BUILDING FROM USB FLASH DRIVE
1. On main menu tap "Build".
2. Tap USB icon to access contents of USB
flash drive.
3. Follow steps 3-7 from Build from On-
Printer storage to complete build from
USB flash drive.
BUILDING FROM PRINT QUEUE
If your 3D40 is registered and added to your
Dremel3D profile, you can send Builds from
your web
www.digilab.dremel.com.
1. If your 3D40 is displaying the Print Queue
notification tap "Build" in the notification
window to access the Print Queue. If you
choose "Decline" you can later access
your Print Queue by tapping "Build" then
"Print Queue".
Building
browser at
30
2. In the Print Queue menu you can choose
to "Build" the next model in the queue or
"Delete" it and advance to the next model.
3. In Model Details tap "Build" to begin
building process or "Delete" to remove the
file.
CANCELING YOUR BUILD ON 3D40
To cancel your object during preheating or
building, tap "Stop" on the touch screen. If
you confirm "Yes" the extruder and build
platform will move to their calibration
positions.
FIG. 12
USB Flash
Drive