Dremel Digilab 3D Slicer Software - Dremel 3D40 FLEX Operating/Safety Instructions Manual

DM 2610039151 10-18.qxp_3D40 10/8/18 10:34 AM Page 24
!
Indicates that there is an error such as filament empty or door open.
Indicates that Ethernet is connected.
Indicates WiFi signal strength and if connected to WiFi symbol will be blue.
Indicates that the extruder is cool.
Indicates that the extruder is warm.
Indicates that the extruder is hot.
Indicates that the printer is connected to Dremel Print Cloud printing services and
that it can receive remote commands.
Dremel 3D40 is compatible with Dremel Digilab 3D Slicer which can be installed from the USB
flash drive that came with your printer or downloaded from www.digilab.dremel.com/software.
The Digilab Slicer allows you to import, edit, and build 3D files. A software overview as well as
detailed walkthroughs and support resources are available at digilab.dremel.com/getstarted.
Touch Screen
ABOUT
Tap to see 3D40 information such as firmware
version, usage counter, printer status, MAC
address, and token.
Touch Screen Icons

Dremel Digilab 3D Slicer Software

24