HP ENVY 13 Maintenance And Service Manual page 59

c.
Lift the cable off the back of the display panel. The webcam cable is attached to the display panel
with adhesive.
When installing the webcam cable, note clip alignment clip (3) at the bottom of the panel. Make
sure you can install the thin part of the cable into the clip.
The webcam module is available using spare part number L54122-001.
The webcam cable is available using spare part number L53362-001.
7.
If it is necessary to replace the display hinges:
a. Remove the three Phillips M2.0 × 2.3 screws (1) that secure each display hinge to the display back
cover.
Component replacement procedures 51