2. PRINTER SETUP
2.3 Connecting the
Power Cord
CAUTION!
As a Power Cord is not supplied
with the printer, please purchase
an approved on that meets the
safety standard of each country.
(Refer to APPENDIX 3.)
1. Make sure that the printer Power Switch is in the OFF ( ) position.
Connect the Power Cord to the printer as shown in the figure below
Power Switch
2. Plug the other end of the Power Cord into a grounded outlet as shown
in the figure below.
Power Cord
[Example of US Type]
E2- 3
ENGLISH VERSION EO1-33057
2.3 Connecting the Power Cord
Power Cord
Power Cord
[Example of EU Type]