4. MAINTENANCE
4.1.5 Optional Cutter Module
WARNING!
1. Be sure to turn the power
off before cleaning the
cutter unit.
2. As the cutter blade is
sharp, care should be
taken not to injure yourself
when cleaning.
1. Loosen the two screws and remove the Cutter Cover.
As the bottom of the Cutter Cover is fitted onto the Cutter Attachment
Screw, slightly lift and detach the Cutter Cover.
2. Remove the White Screw to detach the Media Guide.
3. Remove jammed media, if any.
E4- 7
ENGLISH VERSION EO1-33057
White Screw
Media Guide
4.1 Cleaning
Screw
Cutter Cover
Cutter Attachment
Screw