Connecting The Power Cord - Toshiba B-852 Owner's Manual

2. PRINTER SETUP
2.3 Connecting the
Power Cord
CAUTION!
1. Make sure that the printer
power switch is turned to the
off position before
connecting the power cord to
prevent possible electric
shock or damage to the
printer.
2. Use only the power cord
supplied with the printer.
Use of any other cord may
cause electric shock or fire.
3. Connect the power cord to a
three-prong outlet only, with
the third prong being a good
ground (earth) connection.
1. Make sure that the printer power switch is in the off position.
2. Connect the Power Cord to the printer as shown in the figure below.
3. Plug the other end of the Power Cord into a grounded outlet as shown
in the figure below.
Power Cord
[Example of US Type(QQ model)]
E2- 4
ENGLISH VERSION EO1-33055

2.3 Connecting the Power Cord

Power Switch
Power Connector
Power Cord
[Example of EU Type(QP model)]