2. PRINTER SETUP
2.5 Loading the Ribbon
(Cont.)
4. Fit the core of the Ribbon Supply Roll into the Ribbon Holders
(Supply side), aligning the notch of the ribbon core with the protrusion
of the Ribbon Holder.
Ribbon Supply Roll
Ribbon Holder (Supply Side)
Fit the protrusion
into the notch.
5. Fit the core of the Ribbon Take-up Roll into the Ribbon Holders
(Take-up side), aligning the notch of the ribbon core with the
protrusion of the Ribbon Holder.
Ribbon Holder (Take-up Side)
Fit the protrusion
into the notch.
E2-15
ENGLISH VERSION EO1-33057
2.5 Loading the Ribbon
Ribbon Core
Notch
Ribbon Supply Roll
Ribbon Take-up Roll