Connecting The Power Adapter And The Power Cord - Toshiba B-EV4D-GS24-CUS-R Owner's Manual

2. PRINTER SETUP
2.5 Connecting the
Power Adapter and
the Power Cord
NOTES:
1. Since the power cord is not
enclosed in this printer, please
purchase a proper one after
referring to page 1-2.
2. The EA10953 AC adapter
should be exclusively used for
the B-EV4D Series printer.
The B-EV4D Series printer
must be powered by the
EA10953 AC adapter.
1. Make sure that the printer power switch is in the OFF (O) position.
2. Insert the Power Cord into the inlet of the Power Adapter.
3. Insert the Power Adapter connector into the Power Jack on the rear of
the printer.
E2- 5
ENGLISH VERSION EO1-33095

2.5 Connecting the Power Adapter and the Power Cord