Table of Contents
Advertisement
3. Checking Where to Install the Printer
Before installing the printer, check the environment and space for the installation.
3.1 For Proper Operation
Supplies and parts, including toner, and photo conductor unit have been evaluated for
quality based on a benchmark for recommended products. Use recommended supplies and
parts to maintain this standard and achieve high quality results.
Place this printer on a level, stable table that is not curved. Do not place across two tables.
The machine must be level within 4.5 mm front to rear, and left to right.
Recommended temperature and humidity.
To load paper, replace consumables, and resolve paper jams, etc., leave a clearance as
shown below.
A: more than 25 cm (More than 35 cm when the AD460 (duplex unit) is attached.)
B: more than 20 cm
C: more than 70 cm
D: more than 50 cm
When moving from a cold to warm location, or if the local temperature rises suddenly,
condensation may occur inside. If this occurs, leave the machine unused for at least one
hour to let it acclimatize.
Extreme temperature rise inside the machine may cause malfunctions. Do not place
anything in the immediate area of the exhaust and intake vents.
Always keep all covers closed.
During printing, do not open the cover of any parts, and do not move the printer.
Do not pull out the paper tray during printing. Printing will stop and paper will jam.
2-5
Advertisement
Table of Contents
