Table of Contents
Advertisement
Available languages
Available languages
3 USING THE TELEPHONE
3.1
SWITCHING THE HANDSET ON/OFF
•
Press and hold
•
Press again
or place it in the base to switch the handset back on.
3.2
CHANGING THE LANGUAGE
Enter the "Handset" menu in order to change the language:
•
Select "Menu" with the left menu key
•
Press the navigator
•
The "Personalise" menu appears on the display. Select "OK" twice. The screen displays the handset menu.
•
Use the navigator key to scroll through the menu and select "Language". The
further options are available. To confirm the language press "OK". The screen displays "English saved" if you
have chosen English. Your handset's menus will be in English.
•
To return to the previous menu, select "Back".
3.3
MAKING A CALL
3.3.1 Direct dialling
•
Press
to obtain a line.
•
Dial the number to be called.
•
To hang up at the end of the call, press
3.3.2 Pre-dialling
With the pre-dialling feature you can enter and modify a number before making the call.
•
Dial a number of up to 25 digits. Press the navigator key
displays a "P".
•
Select "Clear" with the right menu key
123456789". To hang up at the end of the call, press
3.4
RECEIVING A CALL
When you receive an external call, the screen displays: "External Call".
To take the call:
•
Press
(if the handset is not on its base/charger)
or
Lift the handset off its base (if the Auto Talk option is active) (see §"7.6 Auto Answer" ).
•
The call in progress
3.4.1 Adjusting the ring volume during incoming call
You can adjust the ring volume with the navigator key
The ring volume is displayed on the screen. There are 5 volume levels as well as the option of turning the ringer off
altogether, in which case "Volume Off" is displayed and
3 seconds, or until the
3.5
HANDSFREE MODE
Handsfree lets you talk to your caller without holding the handset. It also enables other people in the room listen to both
sides of your conversation.
Make a handsfree call
•
Press
twice. The display shows
•
To switch back to the handset at any time, press
handsfree by pressing
8
to switch the handset off.
.
key downwards twice.
icon appears on the screen. The call duration is displayed after about 15 seconds.
key is pressed.
. Dial the number. Your call can be heard over the handset's loudspeaker.
during the call.
or put the handset back on the base.
upwards and hold to insert a pause. The screen
to correct. Press
to initiate the call. The screen displays: "Calling
or put the handset back on the base.
or
while the telephone is ringing.
icon appears. This information remains on screen for about
again. Press
and
arrows indicate that
to end the call. You can switch any call to
Topcom Butler 5500
Topcom Butler 5500
Advertisement
Table of Contents
