Setup Prefix Memory; Searching A Handset From The Base; Managing Multiple Handsets; Setting Up An Additional Handset - Topcom BUTLER 3900 User Manual

2. Select PHONE BOOK using up
3. Press
INT
4. Select DELETE using up
5. Press
INT
6. Move through the name list using up
alphabetical order
7. Press to confirm when you find the name you want to delete or press Cancel C
INT
key to stop
9.1.4 Delete all entries
1. Enter the menu by pressing
2. Select PHONE BOOK using up
3. Press
INT
4. Select DELETE ALL using up
5. Press
INT
6. Press to confirm when 'CONFIRM?' appears or press Cancel C key to stop
INT

9.2 SETUP PREFIX MEMORY

1. Enter the menu by pressing
2. Select HANDSET using up
3. Press
INT
4. Select PREFIX MEM using up
5. Press
INT
6. Enter the prefix number or press Delete C key to delete
7. Press to validate
INT

9.3 SEARCHING A HANDSET FROM THE BASE

When Paging button
ringing will help you locate a lost handset. By pressing Paging button
one of the handset keys, the ringing stops.

10. MANAGING MULTIPLE HANDSETS

10.1 SETTING UP AN ADDITIONAL HANDSET

You can register new handsets on the base if these handsets support the DECT GAP profile.
The base can support a maximum of 4 handsets. If you already have 4 handsets, and you
want to add another one or change one handset, you must first remove a handset, then
associate the new handset.
To register any handset, the base must be put into a special registration mode:
1. Press and hold the paging key
2. The base will then emit a beeptone. The base is now ready to register a new handset.
You have 10 minutes after pressing the button to register a new handset.
After getting the base into registration mode, start the procedure on the new handset:
Butler 3900/Twin/Triple/Quattro
and down
and down
and down
and down
and down
and down
and down
on the base is pressed, all the registered handsets will ring. This
of the base for 4 seconds.
Butler 3900/Twin/Triple/Quattro
keys
keys
keys, the list scrolls in
keys
keys
keys
keys
again or pressing
23