Advertisement
7. Installation
1) Apply Thermal Grease
Spread thermal grease thinly and evenly
over the CPU core.
2) Install Clip Support
Install the two clip supports at both sides
of the retention guide as shown on the
right.
3) Insert Bolts
Insert the bolts into the inner holes on the clip.
4) Fasten Bolts
Place the FHS on the center of the CPU.
Screw in both bolts in an alternating
fashion until they are completely tightened.
5) Supply Power
Connect FAN MATE 1 between the
motherboard and the fan.
* The specifications of any product may change without prior notice to improve the performance thereof.
All manuals and user guides at all-guides.com
(INTEL Pentium 4-478)
Retention Guide
3-Pin Fan
Connector
(Mainboard)
Mainboard
CPU (IHS)
Thermal Grease
Clip Support
Bolt
Outer Hole
Inter Hole
Clip
FAN MATE 1
Speed Control Knob
3-Pin Fan Connector
(CNPS7000A)
5
Advertisement
