Related Manuals for ZALMAN CNPS7000C-Cu/AICu
Summary of Contents for ZALMAN CNPS7000C-Cu/AICu
- Page 2 Note 1) The maximum weight for a cooler is specified as 450g for Intel Socket 775 and AMD Socket AM2/754/939/940. Special care should be taken when moving a computer equipped with a cooler which exceeds the relevant weight limit. Zalman is not responsible for any damage that occur while moving a computer.
- Page 3 ① Cooler (CNPS7000C-Cu/AlCu) ② Thermal Grease ③ Clip Support for Socket 775 ④ Backplate for Socket 775 ⑤ Clip Support Fixing Bolt (4 bolts) ⑥ Clip A ⑦ Installation Bolt (4 bolts) ⑧ Clip B ⑨ Clip Lever ⑩ Fan Speed Controller (Fan Mate 2) ⑪...
- Page 4 1) Intel Socket 775 CPUs 2) AMD Socket AM2/754/939/940 CPUs Caution) No motherboard components with a height greater than 39mm, as well as the PSU, disk drives, VGA card, and RAM should be present within a 55mm radius from the center of the CPU.
- Page 5 2) Clip Support Installation Align the Clip Support for Socket 775 (③) and the Backplate for Socket 775 (④) with the mounting holes on the motherboard and fasten them together with the Clip Support Fixing Bolts (⑤). The Lever Slot on the Clip Support for Socket 775 should be properly oriented on the hinged side of the Socket Lever when installing.
- Page 6 1) Clip Installation Clip A(⑥) is installed in the factory so AMD socket users MUST remove B(⑧ ⑧ ). Adhere to the following instructions to change the clip. Clip A and install Clip A. Unfasten the Fan Support Fixing Screws and disassemble the Fan Support from the Heatsink.
- Page 7 1) Fan Mate 2 Installation on the Inside of a System Connect the two 3-pin connectors of the cable to the motherboard and to the CNPS7000C’s Fan Connector as shown in the diagram. 2) Fan Mate 2 Installation on the Outside of a System Pull the 6-Pin Connector(⑬) out of the system through the back and connect it to Fan Mate 2(⑪), which should be installed...
- Page 8 Zalman's Ultra Quiet Power Supplies, Fanless Northbridge Coolers, Heatpipe HDD Cooler, Ultra Quiet Case Fans, VGA Coolers, and Multi Fan Controllers facilitate stable performance and a noiseless computing environment. TRIMON series monitors are capable of fine 2D imaging and ultra clear stereoscopic 3D imaging, making it ideal for 3D games, movies, design, scientific research, and presentations.