Download Print this page

Advertisement

Quick Links

User's Manual
CNPS 7600
Intel Socket LGA 115X / 775 CPUs
AMD Socket FM2+ / FM2 / FM1 / AM3+ / AM3 / AM2+ / AM2 CPU&APUs
To ensure safe and easy installation, please read the following precautions
Product design and specifications may be revised to improve quality and performance.
www.zalman.com
Ver.161027

Advertisement

loading

Summary of Contents for ZALMAN CNPS 7600

  • Page 1 User's Manual CNPS 7600 Intel Socket LGA 115X / 775 CPUs AMD Socket FM2+ / FM2 / FM1 / AM3+ / AM3 / AM2+ / AM2 CPU&APUs To ensure safe and easy installation, please read the following precautions Product design and specifications may be revised to improve quality and performance.
  • Page 2 If any problem is found, contact the retailer to obtain a replacement. Socket 7) Zalman Tech Co., Ltd. is not responsible for any damages due to overclocking. 8) During transportation of the system, the cooler must be removed. Zalman is not responsible for any damages that occur during the transport of a system.
  • Page 3: Installation

    Installation Installation 1. INTEL socket 115X/775 Installation 3) Clear off any particles or residue from the 1) Install the Clip Support to the motherboard CPU’s surface. Then spread a thorough layer according to the socket-type. (See diagram) of Thermal Grease on the CPU and the base of the cooler.
  • Page 4 Installation 주의사항 1) 어린이의 손이 닿지 않는 곳에서 보관 사용하십시오. 2. AMD Socket Installation 1) Clear off any particles or residue from the 2) 동봉된 써멀 그리스를 먹거나 피부와 눈에 접촉되지 않도록 주의하십시오. 피부에 닿았을 때는 물로 씻으시고, 자극이 CPU’s surface. Then spread a thorough layer 지속되거나...
  • Page 5 구성품 설치방법 구성품 1. INTEL Socket 115X/775 설치 방법 1) Socket 유형에 따라 마더보드에 클립 지지대를 설치합니다. ( 그림참조) Cooler User’s Manual Socket 115X Socket 775 2) 메인보드에 클립 지지대를 맞추고 고정 핀으로 고정합니다. Socket Thermal Grease Bolt [ZM-STG2M]...
  • Page 6 설치방법 설치방법 2. AMD Socket 설치방법 3) CPU 표면의 이물질을 깨끗하게 제거하고 쿨러와 1) CPU 표면의 이물질을 깨끗하게 제거하고 쿨러와 접촉하는 CPU 표면에 써멀 그리스를 적당히 도 접촉하는 CPU 표면에 써멀 그리스를 적당히 도 포합니다 포합니다 4) 클립 서포트에 쿨러를 설치합니다.(그림참조) 2) 클립...