Advertisement
Quick Links
User ' ' s Manual
User ' ' s Manual
AMD Duron/Athlon/Athlon XP/Sempron
Socket 462 CPU
CNPS7000B
* Applies to all versions of CNPS7000B LED.
* Please read before installation.
http://www.zalman.co.kr http://www.zalmanusa.com
(English version)
Intel Pentium 4
Socket 478 CPU
Socket 775 CPU (ZM-CS1 separate
purchase necessary)
AMD Sempron/AMD64 (Athlon 64/Opteron)
Socket 754/939/940 CPU
Advertisement
Related Manuals for ZALMAN CNPS7000B-AlCu
Summary of Contents for ZALMAN CNPS7000B-AlCu
- Page 1 Intel Pentium 4 Socket 478 CPU Socket 775 CPU (ZM-CS1 separate purchase necessary) AMD Duron/Athlon/Athlon XP/Sempron Socket 462 CPU AMD Sempron/AMD64 (Athlon 64/Opteron) Socket 754/939/940 CPU CNPS7000B * Applies to all versions of CNPS7000B LED. * Please read before installation. http://www.zalman.co.kr http://www.zalmanusa.com...
-
Page 2: Specifications
Note 1)The maximum weight for a cooler is specified as 450g for Intel Socket 478/775 and AMD Socket 754/939/940 and 300g for AMD Socket 462. Special care should be taken when moving a computer equipped with a cooler which exceeds the relevant weight limit. Zalman is not responsible for any damage that occurs when moving a computer. - Page 3 5) The exposed core of a Socket 462 CPU can be cracked if proper care is not taken. Read the “Installation” section thoroughly before installing. NOTICE) Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing.
- Page 4 ② No motherboard components with a height greater than 39mm, as well as the PSU, disk drives, VGA card, and RAM should be present within a 55 mm radius from the center of the CPU. ③For more information, please visit the Zalman website and click on “ Compatibility between CNPS7000(A/B) and Socket 478 Pentium 4 Motherboards” link.
- Page 5 PSU, disk drives, VGA card, and RAM should be present within a 55mm radius from the center of the CPU. ② For more information, please visit the Zalman website and refer to “CNPS7000(A/B) Compatible Socket 754/939/940 Motherboards List”...
- Page 6 8. Installation (AMD Duron / Athlon / Athlon XP / Sempron - 462) 1) Install Clip Supports for Socket 462 Install the clip supports for socket 462 on the motherboard. Make sure to place A-type (blue : installed near the lever) and B-type (white) supports at the appropriate location. The installation should be done in the order of : bolts >...
- Page 7 9. Installation (AMD Sempron / AMD64 - 754/939/940) 1) Fasten Nipples Place a small washer on the motherboard. Then, put a nipple over it and fasten the nipple until the Backplate for AMD64 is firmly attached to the motherboard on the opposite side of the CPU. * A Retention Guide is not necessary for installing CNPS7000B on Socket 754/939/940.
-
Page 8: Notes On Usage
Turned fully clockwise, it operates in Normal Mode. You can select the desired fan speed by turning the knob. Note) FAN MATE 2 has been specifically designed for the fan of this product. Zalman Tech Co., Ltd. is not responsible for any damage to systems or CPUs caused by using it with other types of fans. - Page 9 12. Zalman Noise Prevention System When building a noiseless computer, use Zalman’s Noiseless Power Supply, Fanless Northbridge Cooler, Heatpipe HDD Cooler, Noiseless Case Fan, Heatpipe VGA Cooler, and Fan Controller for stable performance and maintain a noiseless environment. Noiseless Power Supply...