Changing Computer Ip Address-Windows 10 - Viessmann Vitogate 300 Supplementary Documentation

Vitogate 300

Changing Computer IP Address-Windows 10

1. From the "start" Windows button (typically the
bottom left hand corner), select the "Settings"
function. 'Control Panel' and open 'Network and
Internet'.
2. Locate 'Network and Internet' and click it to open.
3. Locate "Ethernet' and select.
4. Locate 'Change Adapter Options' and select.
5. The Network Connections window will appear and
allow you select the correct connection which is the
Local Area Connection that the computer is using
to communicate with the Vitogate. It cannot be a
wireless network or Bluetooth connection.
6. Use a right click and select Properties of the Local
Area Connection. Ensure that the LAN selected is
correct for the computer to gateway network as
there can be multiple LANs.
7. Find 'Internet Protocol Version 4 (TCP/IP)', select
this and then click on 'properties'. Select 'Use the
following IP address' and enter and IP address of
169.254.0.20 (the '20' may be substituted with
any other number as long as it isn't 1 since that is
the Vitogate 300. Set the subnet mask of
255.255.0.0. Click 'OK' to save the settings. The
Vitogate and Computer are now on the same
network. You can access the Vitogate 300 webpage
by opening a browser webpage and entering the
address 169.254.0.1 in the URL window.
7
1
3
7
4
2
4
5
6