Toastmaster TLWTOB6 Use And Care Manual page 12

Preset Functions (cont.)
4. Open the Glass Door and place your food in the Lightwave Oven. Close
Glass Door.
5. Press the Start/Stop button. The Timer will begin to count down and
"min." will flash in the Display Window.
6. Condensation may build-up on the inside of the Glass Door, but will
evaporate during Preset Function.
7. The Lightwave Oven will beep 5 times when the program is complete.
8. Open the Glass Door. Using oven mitts remove hot pan, Wire Rack and
food. Close Glass Door.
9. Unplug oven and allow to cool completely before cleaning. See User
Maintenance Instructions. Unplug when not in use.
NOTE: To change cooking time during baking process, you must start
the programming sequence over. Press and hold the Stop button until
beep is heard. The default time will appear in the Display Window.
Reprogram the time and/or function and press the Start button to
resume the cooking process.
Hints For Cooking
Heavy-duty aluminum foil may be used to cover top of baking container
to reduce over browning. Tuck ends of foil closely against edge of pan.
Place food in the center of the Lightwave Oven for better browning.
Food may cook faster than recipe or package time. Check for
doneness prior to end of cook time.
Rotate and turn food over for more even browning halfway through
the cooking process.
To prevent heat loss, avoid opening the Glass Door excessively.
For best results, foods that contain a leavening agent should be
baked on the lowest Shelf Position of the Lightwave Oven.
Always use the Broil Insert and Bake/Broil Pan with the Broil
function.
11.