Toastmaster TLWTOB6 Use And Care Manual page 10

Operating Instructions (cont.)
6. Remove any dust that may have accumulated during packaging,
simply wipe the Lightwave Oven exterior and interior with a clean,
damp cloth.
7. Do not use abrasive cleaners.
8. Do not put the Lightwave Oven cord or plug in water.
9. When you are ready to use the Lightwave Oven, plug the cord into
a 120V AC outlet. Close the Glass Door. The Operation Light and
the Display Window will illuminate while the unit is plugged in.
10. To eliminate any protective substance or oil that may have been
used for packing and shipping, select the Basic Function by pressing
the Function Button until the arrow is pointing toward the Basic
Function.
11. Set the Timer by turning the Timer/Toast Color Dial until 15 min.
displays under Timer in the Display window.
12. Press the Start/Stop Button and the Lightwave Oven will begin the
Basic Function process. A small amount of smoke and odor may be
detected. This is normal.
13. Condensation may build-up on the inside of the Glass Door, but
will evaporate during the Basic Function.
14. The Lightwave Oven will beep when the Basic Function is complete.
15. Unplug oven and allow to cool completely before cleaning.
16. To avoid scratching, marring, or discoloration, do not store
anything on top of the Lightwave Oven during operation.
See User Maintenance Instructions. Unplug when not in use.
CAUTION: Appliance surfaces are hot during and after use.
CAUTION: Always wear protective, insulated oven mitts on hands when
touching hot Lightwave Oven or hot dishes and food or when inserting
or removing Wire Rack, Broil Insert, Bake/Broil Pan and Crumb Tray.
9.