Operation Mode - NEC QX-S5500G Series Installation Manual

Installation Guide
QX-S5500G Series Ethernet Switches
V. LSWM5XGT8PM
(1) 1/10GBase-T port
(3) Screw
LED status
Steady green
Flashing green
Steady yellow
Flashing yellow
Off

9.3.2 Operation mode

An expansion
port-configuration-mode command.
This command is effective only by the QX-S5548GT-4X1C.
0－All ports on an expansion interface card are invalid.

1－Port 5 to port 8 on an expansion interface card is invalid.

2－A port of GigabitEthernet 1/0/41 to GigabitEthernet 1/0/48 of a front panel is

invalid.
Table 9-6 The port LED of 1/10GBase-T description
The port has a link and is operating at 10 Gbps.
The port is sending or receiving data at 10 Gbps.
The port has a link and is operating at 1 Gbps.
The port is sending or receiving data at 1 Gbps.
No link is present on the port.
interface card can
9-9
9. Appendix B FRUs and compatibility matrixes
(2) 1/10GBase-T port LED
(4) Handle
Description
specify an operation mode using the