Dial Tone Detection; Compatibility - Brother MFC-240C User Manual

f
Lift the scanner cover to release the
lock (1). Gently push the scanner cover
support down (2) and close the scanner
cover (3).
g
Push the paper tray firmly back into the
machine.

Dial Tone detection

When you send a fax automatically, by
default your machine will wait for a fixed
amount of time before it starts to dial the
number. By changing the Dial Tone setting to
Detection you can make your machine dial
as soon as it detects a dial tone. This setting
can save a small amount of time when
sending a fax to many different numbers. If
you change the setting and start having
problems with dialling you should change
back to the default No Detection setting.
a
Press Menu, 0, 5.
b
Press a or b to choose Detection or
No Detection.
Press OK.
c
Press Stop/Exit.
100

Compatibility

If you are having problems sending or
receiving a fax due to possible interference
on the phone line, we recommend that you
adjust the Equalization for compatibility to
reduce the modem speed for fax operations.
a
Press Menu, 2, 0, 2.
b
Press a or b to choose Normal (or
Basic).
Basic cuts the modem speed to
9600 bps. Unless interference is a
recurring problem on your phone
line, you may prefer to use it only
when needed.
Normal sets the modem speed at
14400 bps. (Default)
Press OK.
c
Press Stop/Exit.
B
Note
When you change the compatibility to
Basic, the ECM feature is only available
for colour fax sending.
B