Toro Groundsmaster 3500 30807 Service Manual page 36

RIGHT
FRONT
4
5
6
7
1. Engine mount bracket
2. Flange nut
3. Flange screw
4. Pump mount plate
Make sure lift or hoist can support the total
weight of the engine before removing the cap
screws from the engine and engine brackets.
13.Remove hex nuts, cap screws, and washers from the
center of the three engine mounts.
Kubota Diesel Engine
3
8
5. Hardened washer
6. 10 mm cap screw (4)
7. 8 mm cap screw (1)
CAUTION
1
2
10
9
Figure 15
One person should operate lift or hoist while the
other person guides the engine out of the ma-
chine.
IMPORTANT: Make sure not to damage the engine,
fuel and hydraulic lines, electrical harness, or other
parts while removing the engine.
14.Remove engine slowly from the machine.
Page 3 − 16
8. Hardened washer
9. Long spacer (4)
10. Short spacer (1)
CAUTION
Groundsmaster 3500−D