Planet WGR-500-4P User Manual page 82

Power Mode
Priority
Device Class
Current Used [mA]
Power Used [W]
Power Limit [W]
Apply
Refresh
Auto-Refresh
The PoE budget is 120W. If the usage of power is over the PoE budget, the system will
show warning message to notify user. To avoid damaging system, don't overuse the
power budget.
User's Manual of WGR-500-4P and WGR-500-4PV
Profile2
Profile3
Profile4
This function is available when choosing schedule on each port.
Allows user to select AT/AF compatibility mode. The default value is AT
mode.
Indicates the power inline mode.
The Priority represents PoE ports priority. There are three levels of power
priority named Low, High and Critical.
The priority is used in case the total power consumption is over the total
power budget. In this case the port with the lowest priority will be turned
off, and offer power for the port of higher priority.
Display PoE class level.
The IEEE 802.3af standard offers PoE class level from 1 to 3 and IEEE
802.3at standard offers the class from 1 to 4.
The Power Used shows how much current the PD currently is using.
The Power Used shows how much power the PD currently is using.
It can limit the port PoE supply watts. Per port maximum value must be
less than 36 watts. Total port values must be less than the Power
Reservation value. Once power overload is detected, the port will
automatically shut down and keep in detection mode until PD's power
consumption is lower than the power limit value.
Press this button to take effect.
Press this button to refresh the current Web page.
Check this box to refresh the page automatically. Automatic refresh occurs
every 3 seconds.
82