Advertisement
Quick Links
Advertisement
Related Manuals for Planet WGS3-24000
Summary of Contents for Planet WGS3-24000
- Page 2 PLANET Layer3 Managed Switch WGS3-2820 / WGS3-5220 WGS3-24000 / WGS3-24240 Quick Installation Guide...
-
Page 3: Table Of Contents
Table of Contents 1. Package Content ... 3 2. Requirements ... 4 3. Terminal Setup ... 5 4. Logon to the Console ... 6 5. Configure IP address ... 7 6. Start Web Management ... 9 Customer Support ...12... -
Page 4: Package Content
1. Package Content Thank you for purchasing PLANET Layer 3 Managed Switch, WGS3-2820/WGS3- 5220/WGS3-24000/WGS3-24240. Terms of “WGS3 Layer 3 Switch” means the Switches mentioned titled in the cover page of this Quick installation guide, i.e. WGS3-2820, WGS3-5220 and WGS3-24000. Open the box of the Layer 3 Switch and carefully unpack it. The box should contain the following items: The WGS3 Layer 3 Switch x 1... -
Page 5: Requirements
Network cables - Use standard network (UTP) cables with RJ45 connectors. Above PC installed with WEB Browser and JAVA runtime environment Plug-in It is recommended to use Internet Explore 6.0 or above to access WGS3 Layer 3 Switch. Note... -
Page 6: Terminal Setup
(console) port of the WGS3 Layer 3 Switch. The console port of the WGS3 Layer 3 Switch is DCE already, so that you can connect the console port directly through PC without the need of Null Modem. -
Page 7: Logon To The Console
4. Logon to the Console Once the terminal has connected to the device, power on the WGS3 Layer 3 Switch, the terminal will display that it is running testing procedures. Then, the following message asks the login user name and password. The factory default user name and password as following, and the login screen in figure 4-1 appears. -
Page 8: Configure Ip Address
The WGS3 Layer 3 Switch is shipped with default IP address as following. IP Address : 192.168.1.254 Subnet Mask : 255.255.255.0 To check the current IP address or modify a new IP address for the Switch, please use the procedures as follow: Show the current IP address 1. - Page 9 6. Repeat Step 1 to check if the IP address is changed. If the IP is successfully configured, the Switch will apply the new IP address setting immediately. You can access the Web interface of WGS3 Layer 3 Switch through the new IP address.
-
Page 10: Start Web Management
The following shows how to startup the Web Management of the WGS3 Layer 3 Switch. Note the WGS3 Layer 3 Switch is configured through an Ethernet connection, please make sure the manager PC must be set on the same IP subnet address. - Page 11 2. When the Login page is shown, press the button. The screen appears as Figure 6-1. Figure 6-1 Web Login Page screen 3. When the following dialog box appears, please enter the default user name “admin” and password “admin” (or the username/password you have changed via console).
- Page 12 5. Now, you can use the Web management interface to continue the Switch management. The Switch Menu on the left of the Web page let you access all the commands and statistics the Switch provides. Please refer to the user manual for more.
-
Page 13: Customer Support
Thank you for purchase PLANET products. You can browse our online FAQ resource at the PLANET Web site first to check if it could solve you issue. If you need more support information, please contact PLANET switch support team. PLANET online FAQ: http://www.planet.com.tw/en/support/faq.php?type=1...