Firmware update
Prepare USB stick
Complete firmware update
1. Insert the USB stick into USB port X5 on the charging station.
2. Press the service button T1 until the 1st signal tone sounds to reset the charging station.
The firmware update will now be completed. The internal status LED next to the service
button will now flash in various colours and at various intervals. The update process can take
up to 1 minute.
After the installation has completed, the internal status LED will be lit permanently in green.
3. Remove the USB stick to trigger a restart of the charging station.
4. Check the firmware version.
Binary version display with a colour code on the status LED during power up.
The firmware version is also displayed in the web interface of the charging station.
1. Format a USB stick with the FAT32 file system.
2. Copy the following files into the root directory
of the empty USB stick. Do not use any
folders.
firmware.bin
firmware.chk
11