Tiger JD 5083E Mounting And Operating Instructions page 28

WHEEL SPACER WITH WHEEL WELL TANK
When the left wheel is off, a spacer kit is needed with the wheel well tank (part#
06200637.) Attach the spacer to the left wheel portion of the axle with the hardware
provided. When you are ready to re-attach the left wheel, the wheel goes on first
then the reinforcement ring and finally the hardware provided.
DRIVESHAFT COUPLER - LOADER
To access the driveshaft of the JD-5101E, a hole will need to be cut in the front of
the tractor frame. After cutting a hole into the front casting the bottom edge of the
hole needs to be beveled out at a 45° angle with a grinder or file. Also the short end of
the coupler connects to the driveshaft and the longer end connects to the pump.
ASSEMBLY
Assembly Section 2-4