The Scanner's Features - Plustek OpticFilm 8200i Ai User Manual

The Scanner's Features


Film Holder Slot: Insert the film holder into the scanner through dust cover.
The film holder can be inserted from either side. The film holder will index at
each frame using the notches on its side rails.

Power LED: It indicates the scanner status.
Light
On
Off

IntelliScan Button: You may press the button to launch the SilverFast
application.

QuickScan Button: You may press the button to perform a predefined scanning
task.

Power Button: Use this to turn the scanner ON or OFF.

Serial Number Sticker: Located at the rear of the scanner. You will need it
when you contact your dealer or our service center in the future.

Power Receptor: It connects the scanner to a standard AC power outlet by the
included power adapter.)

USB Port: It connects the scanner to a USB port on your computer by the
included USB cable.
The scanner is turned on, ready to scan images.
The scanner is off, either because the power is not turned on,
or because the power cord is not properly plugged into an AC
power outlet.
Status
5