Windows Installation; Installing And Setting Up The Scanner - Plustek OpticFilm 8200i Ai User Manual

Windows Installation

Installing and Setting up the Scanner

Please follow the step-by-step procedures described below to install the USB scanner.
Step 1. Connecting the Scanner to Your Computer
 Plug the power adapter into the scanner's power receptor.
 Plug the other end of the power adapter into a standard AC power outlet.
 Plug the square end of the included USB cable to the USB port at the rear of the
scanner.
 Plug the rectangular end of the USB cable to the USB port on the back of your
computer.
Note: If there is another USB device connected to the computer, connect the
scanner to an available USB port.
10