Step 4. Press The Quickscan Button; Step 5. Configure Quickscan Settings; Step 6. Finish Scanning - Plustek OpticFilm 8200i Ai User Manual

Step 4. Press the QuickScan Button

Please make sure the mounted slide or film holder is in an indexed position to ensure
proper scan results. Press the QuickScan button to commence scanning.

Step 5. Configure QuickScan Settings

If you have checked [Enable] and [Confirm] in the [Preview] section of the
QuickScan Settings window, a preview window will be opened where you can
readjust some of the settings to your needs. Please refer to "Chapter II, Preview
Window" for more information about the available settings.

Step 6. Finish Scanning

Once you have confirmed that all settings are to your satisfaction, please click on the
[Scan] button to perform the final scan and save it to your hard drive.
27