Installation - YASKAWA GA800 Series Installation Manual

NOTICE
Do not let unwanted objects, for example metal shavings or wire clippings, fall into the drive during drive
installation. Put a temporary cover over the drive during installation. Remove the temporary cover before start-up. Unwanted objects
inside of the drive can cause damage to the drive.
Note:
Do not put drive peripheral devices, transformers, or other electronics near the drive. Shield the drive from electrical interference if
components must be near the drive. The drive or the devices around the drive may malfunction due to electrical interference.
◆
IP55/UL Type 12 Heatsink External Mounting Drive and Cut-Out Dimensions and

Installation

Model Exterior and Mounting Dimension Diagram
2004 - 2082
4002 - 4060
Exterior and Mounting
Dimension Diagram 1
2110
4075
2138
Exterior and Mounting
Dimension Diagram 2
4089, 4103
2169, 2211
Exterior and Mounting
Dimension Diagram 3
4140, 4168
2257, 2313
Exterior and Mounting
Dimension Diagram 4
4208 - 4302
2360, 2415
Exterior and Mounting
Dimension Diagram 5
4371, 4414
Exterior and Mounting
4477 - 4720
Dimension Diagram 6
YASKAWA TOEPC71061779B GA800 Drive Installation Manual
Panel Cut-Out Dimension Diagram
Panel Cut-Out
12
Dimension Diagram 1
Panel Cut-Out
13
Dimension Diagram 2
Panel Cut-Out
14
Dimension Diagram 3
Panel Cut-Out
15
Dimension Diagram 4
Panel Cut-Out
16
Dimension Diagram 5
Panel Cut-Out
17
Dimension Diagram 6
3 Mechanical Installation
Installation Procedure
Procedure A
18
Procedure B
19
Procedure C
19
20
Procedure D
20
21 Procedure E
23
24
26
27
28
11