Samson TROVIS 5757-3 Mounting And Operating Instructions page 7

Referenced standards and regulations
The electric actuators with process controllers comply with the requirements of the Directives
2014/30/EU and 2014/35/EU. The declaration of conformity includes information about
the applied conformity assessment procedure. This declaration of conformity is included in
the Appendix of these instructions.
The electric actuator with process controller is designed for use in low voltage installations.
Î For wiring, maintenance, and repair, observe the relevant safety regulations.
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
− Configuration manual u KH 5757 for TROVIS 5757-3 Electric Actuator with Process
Controller (detailed description of all functions and parameters)
− Mounting and operating instructions of the valve on which the electric actuator is mount-
ed, e.g. for SAMSON valves:
u EB 3135-1 for Type 2488 Pressure-independent Control Valve (PICV)
u EB 3136 for Type 2488 N Pressure-independent Control Valve (PICV)
u EB 5861 for Type 3260 Three-way Valve
u EB 5863 for Type 3226 Three-way Valve
u EB 5866 for Type 3222 Globe Valve
u EB 5867 for Type 3222 N Globe Valve
u EB 5868 for Type 3213 Globe Valve
u EB 5895 for Type 3267 Valve with Jet Pump
EB 5757 EN
Safety instructions and measures
7