Your grill will require minimal assembly. The Grill2Go™ is packaged in three major
components. Additional parts are stored beneath grill lid. Remove all protective
packaging and product information cards before assembly.
NOTE: The rubber spacers on the
grill lid help to protect the non-stick
cooking surface and should not be
removed.
Graphics
in front
Assembly
Grill
Plinth
Legs
Plinth is designed to fit into
slots at each corner of legs.
Plinth will only fit into legs
correctly and easily when
assembled as shown.
Larger leg opening to right
side during assembly.
Spacer
Grill2Go • 9