Thermos 465611003 Owner's Manual page 17

Connecting The Adapter Hose To The LP Tank (continued)
5. Hold hose end, insert nipple (A) into LP tank valve. Hand tighten coupling nut,
holding connector in a straight line
the connection.
6. Turn the coupling nut clockwise to tighten to a full solid stop. The hose-end will seal on
the back-check feature in the LP tank valve, resulting in some resistance.
one-half to three quarters turn is required to complete connection. Tighten by hand
only - do not use tools.
NOTE: If you cannot complete connection, disconnect hose-end and repeat steps 5 and 6. If
you are still unable to complete the connection,
Hose Check
Before each use, check to see if hose is cut or worn. Replace damaged hose before using grill.
Use only hose specified by manufacturer.
• Do not insert any foreign objects into the valve outlet. You may damage the valve
and cause a leak. Leaking propane may result in explosion, fire, severe personal
injury, or death.
• Never attempt to attach this grill to the self-contained LP gas system of a camper
trailer or motor home.
(B)
Nipple must be centered
into the LP tank valve.
B
Position coupling nut
and hose-end as shown
for proper connection to
LP tank valve.
WARNING
with LP tank valve
A
do not use this connector!
so as not to cross thread
Coupling nut
An additional
Grill2Go • 17