Using Emulation Mode; Using The Help System - Extron electronics CrossPoint 300 Series User Manual

im Vertrieb von
Matrix Software, cont'd

Using emulation mode

Emulation mode allows you to set up the software without attaching the switcher
to the computer. To use emulation mode, do the following:
1.
2.
3.
4.
5.
6.

Using the help system

For information about program features, you can access the help program in any of
the following ways:
•
•
•
www.camboard.de
5-10 CrossPoint 300 Matrix Switchers • Matrix Software
CAMBOARD Electronics
Double-click the Matrix Switchers+ Control Program icon in the Extron
Electronics group or folder.
Choose Emulate, and click Ok.
Choose an emulation file to open, and click OK. The file DEMO.MTX
provides a sample of a completed matrix setup. Selecting the file NEW.INI or
clicking on Cancel provides a blank setup to get you started.
Enter the file name under which you want to save any changes to the file, and
click Ok.
Select the number of video boards, audio boards, and matrix model for which
you are preparing a configuration, and click Ok.
Continue using the program as described on page 5-4.
From the Extron Electronics program folder or group,
double-click on the Matrix Switcher+ Help icon (shown at
right).
From within the Matrix Switcher Control Program, click on
the Help menu on the main screen.
From within the Matrix Switcher Control Program, press the F1 key.
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de