About This Manual; About The Matrix Switchers - Extron electronics CrossPoint 300 Series User Manual

im Vertrieb von
Introduction
Introduction, cont'd

About this Manual

This manual contains installation, configuration, and operating information for the
Extron CrossPoint 300 wideband RGBHV analog matrix switchers.

About the Matrix Switchers

Matrix switchers distribute any input signal to any combination of outputs. The
matrix switchers can route multiple input/output configurations simultaneously.
The matrix switchers are single box solutions to complex wideband video and/or
audio routing applications (figure 1-1). Each input and output is individually
isolated and buffered, and any input(s) can be switched to any one or all outputs
with virtually no crosstalk or signal noise between channels.
The matrix switchers are available in a variety of matrix sizes (the matrix size is the
number of inputs and outputs):
•
•
•
•
•
•
•
CrossPoint 300 series switchers offer two models of each matrix size: HV for
switching RGBHV video signals only, and HVA models for switching RGBHV
video and two-channel stereo audio (balanced and unbalanced).
The CrossPoint 300 Series have a video bandwidth of 300 MHz (-3 dB). All models
can also switch RGBS, RGsB, RsGsBs, HDTV, component video, S-video, and
composite video signals.
All HVA models input and output audio on 3.5 mm, 5-pole captive screw
terminals. For all HVA switchers, the audio switching can be either linked with the
video (audio follow) or independent of the video (audio breakaway). Adjustable
input audio gain and attenuation compensates for level differences between audio
inputs.
Each matrix switcher can be remotely controlled via its RS-232/RS-422 port. The
matrix switchers are programmed with the Extron Simple Instruction Set™ (SIS™),
a set of basic ASCII code commands that provide simple control through a control
system or PC without programming long, obscure strings of code. SIS commands
can be entered via the RS-232/RS-422 link.
The RS-232/RS-422 port can be connected to a control system, a PC, or the Extron
MCP 1000 remote control panel and/or MKP 1000 remote keypad.
The matrix switchers are housed in rack-mountable, metal enclosures with rack
ears to fit in a 19" rack.
•
•
Each model has an internal 100 VAC to 240 VAC, 50/60 Hz, 65 watt, autoswitchable
power supply that provides worldwide power compatibility.
www.camboard.de
1-2 CrossPoint 300 Matrix Switchers • Introduction
CAMBOARD Electronics
CrossPoint 300 84 (eight inputs by four outputs)
CrossPoint 300 88 (eight inputs by eight outputs)
CrossPoint 300 816 (eight inputs by sixteen outputs)
CrossPoint 300 124 (twelve inputs by four outputs)
CrossPoint 300 128 (twelve inputs by eight outputs)
CrossPoint 300 168 (sixteen inputs by eight outputs)
CrossPoint 300 1616 (sixteen inputs by sixteen outputs)
The CrossPoint 300 84, 88, 124, and 128 are in a 3U high enclosure.
The CrossPoint 300 816, 168, and 1616 are in a 6U high enclosure.
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de