Extron electronics CrossPoint 300 Series User Manual page 56

im Vertrieb von
Operation, cont'd
2.
3.
Figure 3-59 — RS-232/RS-422 and baud rate selection
4.
Figure 3-60 — Exit Serial Port Configuration mode
www.camboard.de
3-36 CrossPoint 300 Matrix Switchers • Operation
CAMBOARD Electronics
Release the Control buttons.
To change a value, press and release the button that relates to the desired
value (figure 3-59).
Press and release the LED(s) to configure the port as follows:
Baud rate:
Enter — 9600 Preset — 19200
View — 38400 Esc — 115200
Serial protocol:
RGBHV — RS-232 Audio — RS-422
The selected LEDs blink and the others remain lit.
In this example, the port is set to RS-422 at 38400 baud.
CONTROL
ENTER PRESET VIEW ESC
= Lit LED, = Blinking LED
Press and release an input or output button to exit the Serial Port Configuration
mode (figure 3-60).
Press and release an
input or output button.
5 ENTER PRESET VIEW
All Control LEDs return to the unlit state.
The switcher requires some time to save the new serial port settings. Wait at
least 5 minutes before removing power from the switcher or the settings may be
lost.
Tel. 07131 911201
Fax 07131 911203
I/O
RGBHV AUDIO
CONTROL
ESC RGBHV AUDIO
Each I/O LED returns to its previous state.
ce-info@camboard.de
I/O